0 Know How To Format Unformattable Memory Card.

Memory Card use FAT16(FAT) file system and through your computer you can format it into only FAT32 and NTFS file system and if you format it with any of these two file system then your memory card will stop working in your mobile phone.
The solution of this problem is to format the Memory Card again with FAT(FAT16) file system through computer because your mobile cant read it any more so you cannot format it from your Mobile. To fix this issue follow the steps given below. To format your Memory Card with FAT (FAT16)
file system, follow the steps given below:

•  Plug-in your Memory Card into your computer.

•  Wait till computer detects the Memory Card.

•  Now note down the Drive Letter of your Memory Card.

Note: In this tutorial we will assume that drive letter of your Memory Card is H: but you should replace it with actual drive letter of your memory card.

•  Now run Command Prompt by Typing CMD and hitting Enter in Start>>Run or by typing CMD and hitting Enter key after pressing WinKEY+R.

Windows 7 and Vista users should type CMD in Start’s Search Box when Command Prompt appear, right click on it and run as administrator.

•  Once Command Prompt launches, Type H: / fs:FAT and hit enter.

Please note that in above tutorial we assumed that H: is drive letter of memory card but this could not be same in your case so make sure to replace H: with actual drive letter of your Memory Card.
Also Please note that if you format anything your data will be erased.

0 How can I reset the trial period of my software?

Uninstall the Software and follow the steps.

• After uninstalling software, OpenRUN(Windows key + R) and type regedit and hit Enter.

• Now Registry Editor Window will appear and here navigate toHKEY_LOCAL_MACHINE \ SOFTWARE \ Your Software name from left pane of this window. If you find any Key name with your software name then just Delete that Key.

• Similarly navigate toHKEY_CURRENT_USER \ Software \ Your Software name and if you find any key with your software name then just Delete it and close the Registry Editor window.

• Again go to RUN and type %temp% and hit Enter.

• Now Delete all the things in that folder. Don’t worry these are the temporary files and not necessary for your operating system.

• Now go to C:\Users\your username here \ AppData.Under AppData open all three folders"Local", "Local Low" and "Roaming”and check. Under these three folders if you find any folder or anything with your Software's name, just delete it.

• *.Now Restart your PC and install the expired software and you can use it again for trial period.

0 How To Use UltraISO Software To Create Bootable USB Flash Drive

Here is how to use UltraISO software to create bootable USB drive:

Step 1:Install UltraISO software on your PC. Even though UltraISO is a paid software, you can download the free 30-day trial version to make your USB bootable.

•  Download ultra iso link

Step 2: The next step is to run UltraISO trial version with admin rights. Right-click on the UltraISO software shortcut on the desktop or Start menu entry, and select Run as administrator option. If you are prompted with Register Now screen, click Continue to Try.. button to use the trial version.

Step 3: In the home screen, click File > Open option to browse to your Windows 7 or Windows 8 ISO file.

Step 4: Next, in the home screen of UltraISO, click on Bootable menu and then click Write Disk Image option to launch Write Disk Image dialog box.

Step 5: In the Write Disk Image dialog, select the Disk Drive as your USB flash drive, select the write method as USB-HDD before hitting the Format button. It will then launch Format Removable Disk dialog, where you need to simply click Start button to begin formatting the flash drive. Please backup all data from the USB device before hitting the Format button.

Step 6: Once the format in done, click Verify > Write button and then click Yes for the warning prompt to start the process. When the writing & Verifying is finished, you will see Burn Successful message event list. Close UltraISO software and connect your USB to a machine to start installing Windows.

 

0 How To Share Files Via LAN Without Internet Connection On Windows 8/7/Vista?

Suppose one day your friend came to your home with her/his new laptop so that she/he can get lots of movies , game or any other file from your computer. So then how you will transfer or move your file from your computer to your friend’s computer?...

If the total file size is not very larger than your flash drive or pen drive is enough to send the file. But if a single file size is larger than your memory size of pen drive then you need

1. A high volume pen drive     or
2.An external drive.

But the best way is you just need a LAN cable and connect the to PC to send files from your PC to your friend Laptop/Notebook/Utltabook.The big advantage of using LAN to move or transfer files is LAN cable is very cheap, easy to carry and you don’t need an internet connection or modem. Just connect Two Computer via LAN and exchange files. So how to share or send files via LAN cable on Window 8/7/Vista?

Step 1: Connect properly two PC via LAN cable ( Make sure both PCs have Windows 8/7/Vista OS)
Step 2`: Open the control panel and Click Network and Sharing Center
Step 3: Now click on Change adapter setting.
Step 4: Right click on “Local Area connection” and select “Properties”
Step 5: Select Internet protocol Version 4 (TCP/IPv4) and click on properties option.
Step 6: Now put IP address in both computers according to below and select OK.

First computer (PC # A)
Enter IP Address: – 192.168.0.1
Enter Subnet mask: – 255.255.255.0

Second computer (PC # B)
Enter IP Address: – 192.168.0.2
Enter Subnet mask: – 255.255.255.0

Step 7: Now restart both PC to properly set up the new IP
Step 8: Now open Network and Sharing Center any of the Computer ( say computer A)
Step 9: Now click on “Change advance sharing setting”
Step 10: Now choose “Private” and change settings and click on Save changes
Step 11: Now select “Guest or Public” profile and and save it
Step 12: For last one select “All networks” profiles & save it
Step 13: Do the same steps from Step 2 to step 6 for the second computer ( say computer B )
Step 14: After doing all these settings you can see Computer A from Computer B’s network option. To get
Network option just open My Computer then look on left side of the explorer window.
Step 15: Now to share a Folder just right click on Folder or file and select “Share with” then “Specific people”
Step 16: Now select “Everyone” then click on “Add” option and last click on “Share” option
                    Now you your folder or file will be shared so you can easily copy to another computer.
Step 17 : If you want to share whole drive then right click on drive
Step 18: choose share with option then select Advance Sharing
Step 19: Properties Windows will open just click on the Advance Sharing option.
Step 20: check the box – share this folder then click on apply then ok button.
Step 21: click start and type “Network” on search, click on this
Step 22: Now you will be able to see your friends PC just open it to access drive or folder. 

0 How To Create Undeletable And Unrenamable Folders?

► How To Create Undeletable And Unrenamable Folders ?
1. Go to Start and then
 Click on Run
 -Type cmd & hit enter (To open Command Prompt ).
2. Remember you cannot create Undeletable & unrenamable folder in your root directory (i.e. where the windows is installed)
That means you can't make this kind of folder in C: drive if you installed windows on C:
3. Type D: or E: and hit enter
4. Type md con\ and hit enter (md - make directory)
5. You may use other words such as aux, lpt1, lpt2, lpt3.....lpt9 instead of "con" in above step.
6. Open that directory,you will see the folder created of name "con".
7. Try to delete that folder or rename that folder windows will show the error message.

► Now the question is how to delete it when you really need to do?
1. Open Command Prompt
2. Type D: ( if u created this type of folder in D drive) & hit enter Type rd con\ (rd - remove directory)
3. Open that directory and the folder will not appear because it is removed.

0 Create a Wifi Hotspot on Window 8 or 7

Create a Wifi Hotspot on Window 8 or 7
                                                                  Laptops without any software !!!
Just using CMD :

•  Goto RUN...

•  Type cmd

•  Now copy paste

below lines one by one....
1. netsh wlan show drivers
2. netsh wlan set hostednetwork mode=allowssid=Netwrok name here
key=password here
3. netsh wlan start hostednetwork
Note : Change network name and password shown
                                                                 above to your choice !
Done !See More